I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera User Manual
Page 42
41
SMTP: The system can be configured to send an Email notification to all
designated receivers if an alarm event is detected, e.g., motion detection event,
video loss, tamper-proof, etc.
Before you start, please configure the DNS Server settings before using the
Email function.
1. Enter the Email settings interface:
2. Configure the following settings:
Sender: The name of the email sender.
Sender’s Address: The email address of the sender.
SMTP Server address: The SMTP Server IP address or host name
(e.g.,smtp.263xmail.com).
SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25.
Transport Mode: Enable SSL function; please check the SSL if it is required
by the SMTP server.
Receiver email address: Entry the receiver email address and then
3. Click to save icon to save the settings.
Mobile Phone Viewer: Click this button to enable IP camera for the
mobile or Table PC remote viewing, this function can suit for the Android,
iPhone Mobile phone and i-Pad Table PC. Entry the UID number or scan QR