I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 85)

84
MOTION DETECT
The user can set up 8 motion detection scenes (each
scene with 4 detecting areas) under this menu. The
alarm output will be triggered when moving objects
enter these detecting areas
SCENE NO.: Move the cursor here and press IRIS
OPEN to enter the setup of Scene Number. Move the
joystick to select a preset number (1-8) and press IRIS
OPEN to confirm.
<EDIT SCENE>: Move the cursor here and press IRIS
OPEN to enter. Move the dome to a user-defined
detecting scene. Press IRIS OPEN to confirm.
<EDIT AREA>: Move the cursor here and press IRIS
OPEN to enter the menu of AREA EDIT.
a)
AREA NO.: Move the cursor here and press
OPEN to enter the setup of AREA Number.
Move the joystick to select a preset number (1-4)
b)
<AREA EDIT>: Move the cursor here and press
OPEN to enter the setup of AREA EDIT. The
screen will display frame with Serial No. The
user can move the frame to the top left Conner of
the wanted detecting area and press IRIS OPEN
to confirm. Then move the joystick to adjust the
size of detecting area and press OPEN to confirm
c)
DELETE: Move the cursor here and press IRIS
OPEN to delete the current detecting area.
d)
SENSITIVITY: Move the cursor here and press
OPEN to enter. Select among LOW. MID and
HIGH, press OPEN to confirm the sensitivity.
e)
DELETE SCENE: Move the cursor here and
press IRIS OPEN to delete the current scene.
f)
AUX ACTIVATE: The dome can activate the
alarm aux output when detecting the moving
object. Press IRIS OPEN to enter and select
between “ON” and “OFF” to activate or
deactivate this function.
g)
CANCEL (SEC): Here means when the alarm aux output is activated by