I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 39)

38
Timing: Click this button to setup the time of IP camera. The detail process
description as below:
Time Zone setup: Configuring Time Synchronization Manually. When the
IP Camera is taken to another time zone, you can use the Time Zone
function to adjust the time. The time will be adjusted according to the
original time and the time difference between the two time zones.
From the Time Zone drop-down menu to select the Time Zone in which the
speed dome locates.
Use DST: If there is the habit of adjusting clocks forward in your country in
certain time period of a year, you can turn this function on. The time will be
adjusted automatically when the Daylight Saving Time (DST; Summer time)
comes. Configuring DST process as below steps:
(1) Check to enable the DST function
(2) Set the date of the DST period then click to save the settings.
Manual setup: Configuring Time Synchronization Manually.
(1) Check the Manual Time checkbox.
(2) Click to set the system time from the pop-up calendar and then click to