I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 79)

78
PRESET
The dome supports 220 presets. Please check the
following steps to set up a preset.
1)
PRESET NO.: Move the cursor here and press
IRIS OPEN to enter the setup of Preset Number.
Move the joystick to select a preset number
(1-64 and 100-255) and press IRIS OPEN to
confirm.
2)
TITLE: Move the cursor here and press IRIS
OPEN to enter the setup of Preset Title. Check
the detailed above in DOME TITLE settings.
3)
<SET>: Move the cursor here and press IRIS
OPEN to enter. Move the dome to a defined
position as preset point and press IRIS OPEN
to save the preset position.
4)
CALL: Move the cursor here and press IRIS
OPEN to call up the current preset.
5)
DELETE: Move the cursor here and press
IRIS OPEN to delete the current preset.
6)
SPEED: Move the cursor here and press IRIS
OPEN to set up the preset call up speed of
LOW, MID and HIGH.