I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 87)

86
AUTO TRACKING (Optional)
Under the auto tracking mode, the dome will auto
track the moving objects entering the scene. When
the object is moving out of the scene, the dome will
return to a preset position as defined after the defined
time.
SENSITIVITY: The user can set up the auto
tracking sensitivity under this menu. When set as
LOW, the dome will do auto tracking when obvious
object entering the screen. When set as HIGH, the
dome will do auto tracking when small object
moving into the screen. Move the cursor there and
press the IRIS OPEN to enter.
TARGET: To set up the size of the tracking object.
The options include Large. MID and SMALL.
AUX: If set “ON” here, the object auto tracking will
activate alarm aux output at the same time. Press
IRIS OPEN to enter to select “ON” or “OFF”
ZOOM MATCH: Under the auto tracking model, if
turn on the function of ZOOM MATCH, the dome
will do zooming in and out during auto tracking to
keep the right proportion between the object and
background. Press the IRIS OPEN to enter. And
move the joystick to select the optical zoom.
ENABLE: Move the cursor here and press OPEN to
enter to select “ON” or “OFF” to enable or disable.
TRACKING SCENE SET: Here the user can set up
the scene that the dome will get back to when
finishing the action of auto tracking. Move the cursor
here and press IRIS OPEN to enter. Move the dome
to the wanted scene and press IRIS OPEN to confirm.
DELETE: Move the cursor here and press IRIS
OPEN to delete the return scene.
RETURN DELAY: To set up the time that dome will
waiting to return to this scene.