I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 68)

67
DOME TITLE
The user can set up the dome title to define each
camera. Dome title support up to 12 characters.
Move the cursor according the left steps and
select INPUT. Press IRIS OPEN to enter.
1)
Move the joystick left and right to position “←”,
and press IRIS OPEN to delete the character
at“←”. Press IRIS CLOSE to exit the edit mode.
2)
Move the cursor to “<CAP>” and press IRIS
OPEN to enter. Move the joystick up and down to
select the input method (such as English Cap,
English, Chinese, Figures, and Symbols)
3)
Mover the cursor to next line of <CAP> and press
IRIS OPEN to enter the mode of character input.
The selected character will be shown in high
brightness. Move the joystick up/down/left/right
to choose the needed characters. Press IRIS
OPEN to move the selected character to the
INPUT position at“←”.
4)
After finishing the character inputs, move the
cursor to “OK” and press IRIS OPEN to confirm.
5)
Also user can move the cursor to “CANCEL” to
cancel the character input settings.