I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 67)

66
PASSWORD
The dome features password protection function
to prevent unanthorized changes to the dome
settings. If the PASSWORD function is enabled,
the operator can not access any dome setting
without entering a valid password.
EDIT PASSWORD: Move the cursor here and
press IRIS OPEN to enter. Please under the old
password before set up the new password. The
initial password is “111111”
ENABLE: Move the cursor here and press IRIS
OPEN to enter. Move the joystick to select
between “ON” and “OFF” . The user need to enter
the password when opening the OSD under the
status of “ENABLE: ON”.