I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 52)

51
recording at 10:00, and the pre-record time is set as 5 seconds, the
IP Camera starts to record at 9:59:55.
Post-record: The time you set to stop recording after the scheduled
time or the event. For example, if an alarm triggered recording ends
at 11:00, and the post-record time is set as 5 seconds, the IP Camera
records until 11:00:05.
Overwrite: If you enable his function and the HDD is full, the new
record files overwrite the oldest record files automatically.
Keep days: If you enable his function and the HDD is full, the new
record files will be stop save into the HDD when the storage days
over your setup volume of Keep days.
Make sure the size of storage media allow to save video clips which setup
volume of “Keep days” mode.