I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 55)

54
Maintenance: Click this button
to update the firmware, restore
the default setting and check the
view log …etc. Please refer the
detail process as below:
Reboot: There are 2 choices to reboot the IP Camera, one is menu, the
other by schedule setting.
Click the “Reboot” icon and the IP camera will reboot, this process will
take 1-2 minutes.
Enable the “Auto reboot” icon, you can setup the reboot schedule to
reboot the IP camera at a specific time. The schedule can be every day
or one day per week. As this process that will keep on the IP camera at
the optimum status.
Reset: You can choice reset the IP
address or all parameters become to
the default setting. Click the
“ Reset IP address “ icon just let the
IP address only become to default
only, the reset parameters will keep
the used setting. Click the “Reset