I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera User Manual

Page 83

Advertising
background image


82

ZONES


The use can set up zone title when the camera
moves to a defined location, which will make it
much easier for the user to identify the location.
The dome supports 8 zone titles. Please check the
following steps to set up a zone


1)

ZONE NO.: Move the cursor here and press

IRIS OPEN to enter the setup of Zone Number.
Move the joystick to select a zone number (1-8)
and press IRIS OPEN to confirm.


2)

TITLE: Move the cursor here and press IRIS

OPEN to enter the setup of Zone Title. Check
the detailed above in DOME TITLE settings.


3)

<LEFT LIMIT>: Move the cursor here and

press IRIS OPEN to enter. Move the dome to a
defined position as left limit and press IRIS
OPEN to save this left boundary.


4)

<RIGHT LIMIT>: Move the cursor here and

press IRIS OPEN to enter. Move the dome to a
defined position as right limit and press IRIS
OPEN to save this right boundary.


5)

DELETE: Move the cursor here and press IRIS

OPEN to delete the current zone.





Advertising