I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 41)

40
2. Click Edit icon to select the Protocol and then entry the Internal/External
Port.
3. Click Add icon to increase this port. Repeat the 1-3 to add another port.
4. Click Save icon to save the setting.
You can edit the Friendly Name of the IP Camera. This name can be detected
by corresponding device, such as a router.
DDNS: Click this button to setup the DDNS function, there are three
default DDNS server for the user choice. If your IP Camera is set to use
PPPoE as its default network connection, you can use the Dynamic DNS
(DDNS) for network access.
Before you start, please registration on the DDNS server is required before
configuring the DDNS settings of the IP Camera. Please do the process to
setup the DDNS.
(1) Enter the DDNS Settings interface:
(2) In the Domain text field, enter the domain name obtained from the DDNS
website.
(3) Enter the Port, User Name, Password registered on the DDNS website and
the check interval period of DDNS server. Click to save the settings.