I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 63)

62
IDLE
IDLE setting means if there is no command for the dome for a period of time, the
dome will run the actions as defined.
1)
TIME: Move the cursor to “TIME” and press IRIS
OPEN to enter, and move the joystick up and dome
to select among 30 sec, 1 min, 5 min, 10 min and
30 min. And press IRIS OPEN to confirm.
2)
ACTION: Move the cursor to “ACTION” and
press IRIS OPEN to enter. Move the joystick to
select the actions including” NONE, PRESET,
SCAN, SEQUENCE, PATTERN. Press IRIS
OPEN to confirm.