I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 25)

24
The difference IP camera brand has its own “Find” and “Advance setup”
setup diagram and setting process. For the detail information, please refer to
the IP camera operation menu.
HTTP port & RTSP port: The both port number must be matched the setting
of IP camera..
Display streaming: You can select the “Dual streaming” or “Same as
recording” mode; If you select the “Dual streaming” mode, the live display
video will show lower resolution (320*240) for split video and higher
resolution (same as recording resolution; such as 1920*1080) for pop-up to
single video on the screen. This Dual streaming mode for live display can
save a huge CPU loading when decoding the video streaming.
Capture audio: You can record sound by microphone from audio input port
of IP camera.
Synchronization with the DVR time: Check to synchronize the time of IP
camera with DVR.
Condition (AWB): Choice the parameters to suit for the camera install
location.
Reboot: Click this icon will reboot the IP camera. .
Setup: Click this icon for detail setting of IP camera; you may not need to I.E.
Browser for the detail IP camera setting. Please refer the diagram as below
(For I-View’s IP camera only):
The detail NVR software operation, please refer to the Witness Pro software
operation file which built in the CD.