I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 84)

83
TIMING ACTION
TIMING ACTION allows the user to set up the
actions of the dome in 7 days (each day with 8
timing segments). When fishing the setup, the
dome will do the actions according to the setup
motion during the defined time segment.
NO.:
Here shows the day within a week. Move the
cursor here and press IRIS OPEN to enter. Move
joystick up or down to select the Serial No. (1-8)
and then press IRIS OPEN to confirm.
START: To set up the start time for the defined
motion within this time segment. Press IRIS
OPEN to confirm.
STOP: To set up the stop time for the defined
motion within this time segment. Press IRIS
OPEN to confirm.
MOTION: To setup the motion that will be
operated in this time segment. The motion
includes: NONE. PRESET 1-8, SCAN 1-4,
SEQUENCE 1-4 and PATTERN 1-4.
ON/OFF: Move the cursor here and press IRIS
OPEN to enter to enable or disable this function.
Press IRIS OPEN to confirm.
COPY: The user could set up each 8 segment of 7
days separately or can copy the finished setting for
one day to the current day. Move the cursor there
and press IRIS OPEN to copy the settings.
BACK: Press opeN to save and back to last menu.
It is not allowed to set up the same time
segment during one day. And the time
segment cannot exceed 00:00. During the timing
action segment, the defined action will be stopped
if the user moves the dome. If there is operation
during the defined time segment, the action will re-activated as long as it is in the
defined timing action segment.