I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera User Manual
Page 34
![background image](/manuals/322158/34/background.png)
33
5.3 Operation Instructions
1)
Main Functions Fast Call Table
Our IR IP Speed dome supports 220 preset positions. You can activate some
special functions by calling upon Fast Code number 65-99.
Serial
No.
Command
Fast Call Up
Note
1
Start Auto Scan
Call 99
Default to start auto scan
of group No.1
2
Start Auto Cruise
Call 98
Default to start auto cruise
of group No.1
3
Start Pattern Tour
Call 97
Default to start pattern
tour of group No.1
4
Start Auto Scan of
Group No.
Call 80+ Call pp+
Call 99
pp means
:
Group No.1-8
5
Start Auto Cruise
of Group No.
Call 80+ Call pp+
Call 98
6
Start Pattern Tour
of Group No.
Call 80+ Call pp+
Call 97
pp means
:
Group No.1-4
7
Stop Auto
Mode/End up
Setting
Call 96
8
Open OSD Menu
Preset 95
(
or Call
95
)
9
Remote Reset
Call 94
10
Recover Factory
Default
Call 82
2)
System Self-Testing
The dome will do self-testing after power up, and system status will show
“Normal” if system Is running normally. If error happens, testing result will be
shown in “○” or “X”. “○” means normal and “X” means error. Please check the
according meaning as follows: