I-View FDMO-2MIP-20XIR IP SpeedDome Network Camera - Manual (Page 33)

32
Setup Tour :
1.
Select Tour ID and then entry the Tour name.
2.
Drop the menu from the Type section, and then select the Tour item.
3.
Click Add (Delete) icon to create (delete) a Tour ID.
4.
Choice the Preset number and then click ’Add’ button, repeat this
process to add more preset ID for tour scan.
5.
Click “ Save” button to save the Preset position.
Setup Scan :
1.
Select Scan ID and then entry the Tour name.
2.
Drop the menu from the Type section, and then select the Scan item.
3.
Click Add (Delete) icon to create (delete) a Scan ID.
4.
Move the IP speed dome Pan/Tilt/Zoom to the position which you want
to setup for the begin position, then click “ Begin” button.
5.
Move the IP speed dome Pan/Tilt/Zoom to the position which you want
to setup for the end position, then click “ End” button
Setup Track :
1.
Select Track ID and then entry the Track name.
2.
Drop the menu from the Type section, and then select the Track item.
3.
Click Add (Delete) icon to create (delete) a Track ID.
4.
Click “ Begin” button and then start to move the Pan/Tilt/Zoom
continually (Maximum is 500 seconds ).
5.
Click “ End” button when you want to stop the track scan.
Run the Preset, Tour, Scan and Track function:
Please follow up the process as below to run the Preset, Tour, Scan and
Track function
1.
Drop the menu from the Type section, and then select the Preset or
Tour or Scan or Track item.
2.
Select the Preset or Tour or Scan or Track ID which you want to run
from Name section.
3.
Click Call icon to start run the Preset or Tour or Scan or Track
function.
4.
Click “-” of IRIS icon to stop the Preset or Tour or Scan or Track
function.