IAI America XSEL-S - Manual (Page 60)

Chapter 3 Operation (Construction for Network)
54
IA Net
XSEL-R/S
3.2.4 Settings for PC Software Connection via IA Net
To connect the XSEL PC software through IA Net, indicate the station number * of the controller
to be connected to on the screen of the XSEL PC software. Select the top station number when
the controller to be connected to occupies several stations.
* I/O Parameter No.602 “IA Net Occupied Station Top No.” of connected controller
[1) Connection Check]
Start up the XSEL PC software, set the communication port and baud rate in the connection
check window and click on the OK button.
[2) Connected Controller Setting]
If IA Net is used, the connected controller setting window appears.
Select “Connect to controller via IA Net”, determine the connected station number and click on
the OK button.
Select the top station number of the
controller to be connected to.