2 alarm level classification – IAI America ACON-CY User Manual
Page 106
94
7. T
roubleshooting
7.2 Alarm
Level
Classification
The alarms are classified into three levels based on the corresponding symptoms.
Alarm level
ALM
lamp
*ALM signal Condition at occurrence of alarm
How to reset
Operation
cancellation
Lit Output
The actuator decelerates to a
stop, and then the servo turns off.
Execute reset using the
PC/teaching pendant.
Cold start
Lit
Output
The actuator decelerates to a
stop, and then the servo turns off.
Reconnect the power.
Note: Whatever the alarm, always investigate the cause of the alarm and remove the cause before resetting the
alarm. If the cause of the alarm cannot be removed, or when the alarm cannot be reset even after the
cause has been removed, please contact IAI.
If the same error occurs again after a reset, the cause of the alarm still exists.