IAI America ACON-CY - Manual (Page 43)

31
3. Installation and W
iring
3.10 Connecting the I/O Flat Cable
Signal name
No.
In case of solenoid valve mode 0 In case of solenoid valve mode 1
Color Wiring
1 24 V Brown-1
2 0 V Red-1
3 Rear end move command input Rear end move command Orange-1
4 Front end move command input Front end move command Yellow-1
5
Intermediate point move
command input Intermediate point move
command
Green-1
6 Servo-on command input Servo-on command input Blue-1
7 Rear end detection output
Rear end positioning complete
output
Purple-1
8 Front end detection output
Front end positioning complete
output
Gray-1
9
Intermediate point detection
output Intermediate point positioning
complete output
White-1
10 Ready output Zone output Black-1
11 Homing complete output Homing complete output Brown-2
12 Alarm output Alarm output Red-2
Flat cable
(pressure-
welded)
Warning: When checking the continuity of the flat cable, exercise due caution not to bend the female
pins on the connector outward. It may cause contact failure, resulting in malfunction.
Red 2
Brown 1
Cable type:
Housing: 51353-1200 (MOLEX)
Contact: 56134-9000 (MOLEX)