Teledyne LeCroy SAS Suite User Manual User Manual
Page 132
Advertising
![background image](/manuals/353605/132/background.png)
Version 6.25
SASSuite User Manual
122
LeCroy Corporation
Step 15 Click the x to close the dialog box. The timer is now set.
Sequential Events and Timers
The recording option above shows an example of using a Loop and Timer to trigger on
Open Timeout violation. This reads "Wait for an OPEN ADDRESS on I1; If OPEN
ACCEPT or an OPEN REJECT occurs on T1 within 1ms, restart the loop; ELSE IF 1 ms
elapses (without detecting an OPEN ACCEPT or an OPEN REJECT on T1) then trigger
the analyzer".
Advertising