Pin-outs for the data in/out connector – Teledyne LeCroy SAS Suite User Manual User Manual
Page 179
SASSuite User Manual
Version 6.25
LeCroy Corporation
169
Pin-Outs for the Data In/Out Connector
The following table lists the pin-out and signal descriptions for the Data In/Out connector
on a cable that connects to the Breakout board.
Data In/Out Connector – Pin-Out
Note:
(*)
Pins 4 and 17 have the same function: they allow external signals
to be used to cause triggering or recording. Pins 3 and 16 are used
to transmit output signals. Pins 6, 7, 8, 9, 18, 19, 21, and 22 (data
pins) are used to define data patterns for external input signals. See
External Input Signals in Chapter 6.
Pin
Signal Name
Signal Description
1
RSV
Reserved
2
GND
Ground
3
GP OUT
General Purpose Output
4
TRG IN 1
Trigger In 1
5
GND
Ground
6
DATA 6
Data 6
7
DATA 4
Data 4
8
DATA 3
Data 3
9
DATA 1
Data 1
10
GND
Ground
11
RSV
Reserved
12
RSV
Reserved
13
+5V
+5 Volts, 250 mA DC Source
14
RSV
Reserved
15
GND
Ground
16
TRG OUT
Trigger Out
17
TRG IN 0
Trigger In 0
18
DATA 7
Data 7
19
DATA 5
Data 5
20
GND
Ground
21
DATA 2
Data 2
22
DATA 0
Data 0
23
GND
Ground
24
RSV
Reserved
25
RSV
Reserved