Teledyne LeCroy SAS Suite User Manual - Manual (Page 27)

SASSuite User Manual Version 6.25
LeCroy Corporation
17
Installing the SASSuite Software
Once the SAS Analyzer has been recognized as a USB device, install the SASSuite
software on the Host PC.
Step 1 On the PC, run setup on the installation CD and follow the
on-screen instructions.
The SASSuite software will install on the PC hard disk.
Step 2 To start the application, launch the LeCroy SASSuite program
from the Start menu:
Start > Programs > LeCroy > LeCroy SASSuite.
The SASSuite program opens.
Note: The software may be used with or without the analyzer. When used
without an analyzer, the program functions as a viewer to view,
analyze, and print recorded files.