Teledyne LeCroy SAS Suite User Manual - Manual (Page 275)

SASSuite User Manual Version 6.25
LeCroy Corporation
265
In this Command Log File, the command initiated in "Event 12" did not complete, and as
a result the system has indicated this by flagging the event as "TIMED OUT". Expanding
the transaction shows the result as "CMD TIMEOUT" to indicate that no command
completion for this event was present in the Command Log File. A Command End Event
is inserted by the SASTracker System to indicate that the trigger condition was violated.
A command may complete with an execution time longer than the trigger timeout period,
but before the system has stopped recording. These late commands will have both a
Command Start Event and a Command End Event, but the execution time still exceeds
the trigger timeout. An example of this is shown in the display below:
This display shows that the Command End Event was recorded, but since the execution
time exceeded the trigger timeout, the command was flagged as "TIMED OUT".
When viewing a large number of commands to determine a timeout violation, use of the
Compact View is helpful. Select Compact from the View menu, or use the Ctrl-Q
keyboard shortcut. The resulting display is shown below.