Teledyne LeCroy SAS Suite User Manual - Manual (Page 274)

Version 6.25 SASSuite User Manual
264
LeCroy Corporation
In this view, related events are grouped together as commands, and each command can
be expanded to show the Command Start Event and Command End Event, as has been
shown above in Command 2. To expand (or combine) commands, click on the small
arrow in the upper left corner of the "Command XX" box.
When grouped as commands, the command completion time is shown for each
command.
In this display, command fragments (see “Theory of Operation” on page 255) are shown
as individual events that are not grouped into commands. However, if a command has
caused the timeout trigger condition to be violated, that trigger event will be shown as a
command in which the second "event" is a special trigger condition summary. This
situation is illustrated in the following display:
A Command End Event is inserted by the SASTracker System when timeouts are detected
and no Command End Event was recorded.