Teledyne LeCroy SAS Suite User Manual User Manual
Page 73
Advertising
SASSuite User Manual
Version 6.25
LeCroy Corporation
63
A new state, State 1, has automatically been added, and now we are ready to tell the
State 1 what to do when the external device is ready to process another SCSI "Check
Condition" status. So first click on "<Click here to add an event>" (under State 1), and
select "SMA Input" and click on the checkbox next to "Positive Pulse", as follows:
Click OK, and the sequence now reads:
To complete State 1, click on "<Click here to add an action>" and select "Branch to
Existing State", and then select State 0 from the drop-down list of available states, as
follows:
Advertising