Teledyne LeCroy SAS Suite User Manual User Manual
Page 224
Advertising
![background image](/manuals/353605/224/background.png)
Version 6.25
SASSuite User Manual
214
LeCroy Corporation
Placing Global Settings in the Generation Block
Some global settings such as AutoAlign = On/Off can be set and reset in the generation
block. For example, a user might want to set SASAutoAlign = ON prior to traffic
generation and then have it change to OFF half way through the generation session.
When placed within the generation block and then viewed in the trace window, global
settings appear as colored bars interspersed amidst the traffic.
Advertising