Chapter 4: avalanche recording options, General recording options, Chapter 4 – Teledyne LeCroy SAS Suite User Manual User Manual
Page 55: Avalanche recording options
SASSuite User Manual
Version 6.25
LeCroy Corporation
45
Chapter 4: Avalanche Recording
Options
Recording options provide instructions for the analyzer hardware as to how a trace
recording should be captured. Included in these instructions are items such as how to
start or stop a recording, what information should be recorded, and trigger conditions that
can be used to automatically record certain data events (or sequences of events) when
they occur.
Since these instructions are specific to the hardware platform being used, there are
differences in the way the recording options are set up for the Avalanche system vs. the
SASTracer system. In order to present this information clearly, we have divided the
information into two Chapters in this User Manual.
This Chapter covers recording options for the Avalanche systems only. For
information on the SASTracer systems, see Chapter 5.
General Recording Options
From the Setup menu, select Recording Options (Avalanche)... . The following screen
is displayed: