Teledyne LeCroy SAS Suite User Manual - Manual (Page 99)

SASSuite User Manual Version 6.25
LeCroy Corporation
89
Recording Rules Toolbar
The Recording Rules toolbar exposes functionality for controlling the Recording Rules
page.
New Event. Opens a menu of events. Selecting an
event causes an event button to appear in the Available
Events area.
Delete Event. Deletes selected event button.
Undo. Undoes last change made to Recording Rules
page. The undo buffer has unlimited depth.
Redo. Repeats changes undone by the Undo button.
Zoom In. Enlarges the display. There are five zoom
levels. The default level is the middle one. If you have a
wheel mouse, you can also zoom by holding down the
Control key and then operating the mouse wheel.
Zoom Out. Makes the display appear smaller.
Show/Hide channels. When pressed, this button tells
the Recording Rules dialog to show the channel buttons
on the Events icons. When unpressed, the channels are
hidden.
Show/Hide Properties Dialog. Shows or hides the
Properties dialog of the selected State/Event/Action.
Config is valid. This message displays when the current
Recording Rules configuration is valid and can be
executed by the hardware. This message gets updated
every time the Recording Rules configuration changes.
When the configuration is incorrect, the message is
replaced by "Config is invalid."
Config is invalid. This message displays when the
current Recording Rules configuration exceeds
hardware limitations. You can click the indicator to get
the diagnostics message box to find the problem.