Teledyne LeCroy SAS Suite User Manual - Manual (Page 143)

SASSuite User Manual Version 6.25
LeCroy Corporation
133
For example, below is a Frame where the Command field has been moved from the
beginning of the Header field to the end.
You can restore the default field order by clicking the Restore Defaults buttons.
Saving Display Options
To complete your display options settings, use the features at the bottom of the Display
Options window. These features remain the same no matter which of the four Display
Options windows you are working in.
• Click Save to save the currently specified display options for use in
future sessions. Any file name can be specified, but you must use the
.opt extension. If no extension is specified, .opt is added by default.
• Click Load to load a previously saved *.opt file, thus restoring a
previous set of display options.
• The Save as Default function is equivalent to the Save function,
specifying the file name default.opt. Whenever you start up the
Analyzer, it automatically loads the default.opt file if one exists.
• Click OK to apply any changes you have made to Display Options and
close this dialog box.
• Click Cancel to cancel any immediate changes you have made and exit
the Display Options menu.
• Click Apply to apply your changes while keeping the Display Options
window open.