Teledyne LeCroy SAS Suite User Manual - Manual (Page 31)

SASSuite User Manual Version 6.25
LeCroy Corporation
21
Probe Control Settings
LeCroy analyzers are designed to interface with the communications channel in a
non-intrusive manner, to minimize any distruption of traffic or error conditions due to
insertion of the analyzer. In some cases, the user may desire to adjust the probe settings
to achieve a more optimum balance of complete data capture with minimal traffic
disruption, and for that reason direct user access is provided to the probe control settings.
The probe control dialog provides several user adjustable settings for the probe
performance, which vary depending on the model (Avalanche or SASTracer).
Modification of these settings occur in real-time and do not require cycling the power or
uploading new firmware.
Avalanche
Systems
To access probe control setting for an Avalanche System, select Probe Control from the
Setup menu.