Teledyne LeCroy SAS Suite User Manual - Manual (Page 32)

Version 6.25 SASSuite User Manual
22
LeCroy Corporation
Selecting this option displays the Probe Control Setting dialog:
Allowed adjustments include chip selection, port selection, applying input signal
equalization, output pre-emphasis, output power, input state, input LOS, and output state.
You can Restore Factory Defaults.
Chip Selection
In the Avalanche System, the probes can be controlled separately for initiator traffic and
for target traffic. For separate adjustments, first adjust one probe, click Apply to apply the
settings, then select the other probe and make adjustments there.
Probe Control Settings can be set for Initiator, Target, or Apply to Both. You can select
the Target from a list.
Port Selection
Probe Control Settings can be set for P1, P2, P3, P4, or Apply to All Ports.