Teledyne LeCroy SAS Suite User Manual - Manual (Page 182)

Version 6.25 SASSuite User Manual
172
LeCroy Corporation
Step 7 If you want to configure the analyzer to trigger on a specific bit
pattern, enter it in the box marked Byte0. Alternatively, you can
enter a hex pattern and mask into the boxes marked Mask and
Match. If no pattern is specified, the analyzer will trigger on ANY
input signal.
Step 8 Click the tab marked Actions.
Step 9 In the Internal Triggering section, select Trigger Analyzer. The
analyzer is now configured to trigger on an input signal.