Teledyne LeCroy SAS Suite User Manual - Manual (Page 16)

Version 6.25 SASSuite User Manual
6
LeCroy Corporation
LeCroy BusEngine
LeCroy’s BusEngine™ Technology is at the heart of the SAS Product Line. The
revolutionary BusEngine core uses FPGA technology and incorporates both the real-time
recording engine and the configurable building blocks that implement data/state/error
detection, triggering, external signal monitoring, and event counting and sequencing.
Like the flash-memory-based firmware that controls its operation, all BusEngine logic is
fully field upgradeable, using configuration files that can be downloaded from the LeCroy
Website.
Connection to Host PC System
The Avalanche and the SASTracer/Trainer are USB 2.0 Certified Hi-Speed Devices. To
upload traces from the analyzer to an attached PC at Hi-Speed, the PC must have a USB
2.0 Certified Host Controller and be running Windows 2000 SP3 or Windows XP.
Note: The analyzer products include 2.0 USB hubs. You might see the
drivers for these generic hubs being installed upon the initial plug-in.