Lincoln Electric 718115 Spirit II 275 - Manual (Page 50)

Section 4: Operation with Automatic Gas Console Spirit II User’s Manual
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
4-4
Verifying Important Parameters
Prior to making a cut or mark with the system, the torch height control and the X/Y
controller must be configured properly. To view the recommended cutting data, press
the Parameters navigation button.
See RS422 Parameter Control for more information on how to adjust these settings.
Viewing the Required Torch Parts
Once the material and thickness have been selected, the torch parts are determined
automatically. To see which consumables need to be built up in the torch head, press
the View Torch Parts button on the Material screen. Press Cancel to return to the
Material screen.