Lincoln Electric 718115 Spirit II 275 - Manual (Page 11)

Spirit II User’s Manual Section 1: Safety
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
1-5
Safety Standards Booklet Index
For further information concerning safety practices to be exercised with plasma arc
cutting equipment, please refer to the following publications:
1. AWS Standard AWN, Arc Welding and Cutting Noise, obtainable from the American
Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
2. AWS Standard C5.2, Recommended Practices for Plasma Arc Cutting, obtainable
from the American Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
3. AWS Standard FSW, Fire Safety in Welding and Cutting, obtainable from the
American Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
4. AWS Standard F4.1, Recommended Safe Practices for Preparation for Welding and
Cutting of Containers and Piping, obtainable from the American Welding Society,
550 NW LeJeune Road, Miami, FL 33126.
5. AWS Standard ULR, Ultraviolet Reflectance of Paint, obtainable from the American
Welding Society, 550 NW LeJeune Road, Miami, FL 33126.
6. AWS / ANSI Standard Z49.1, Safety in Welding, Cutting, and Allied Processes,
obtainable from the American Welding Society, 550 NW LeJeune Road, Miami, FL
33126.
7. ANSI Standard Z41.1, Standard For Men’s Safety-Toe Footwear, obtainable from
the American National Standards Institute, 11 West 42nd Street, New York, NY
10036.
8. ANSI Standard Z49.2, Fire Prevention in the Use of Cutting and Welding
Processes, obtainable from the American National Standards Institute, 11 West
42nd Street, New York, NY 10036.
9. ANSI Standard Z87.1, Safe Practices For Occupation and Educational Eye and
Face Protection, obtainable from the American National Standards Institute, 11
West 42nd Street, New York, NY 10036.
10. ANSI Standard Z88.2, Respiratory Protection, obtainable from the American
National Standards Institute, 11 West 42nd Street, New York, NY 10036.
11. OSHA Standard 29CFR 1910.252, Safety and Health Standards, obtainable from
the U.S. Government Printing Office, Washington, D.C. 20402.