3 totalizer reset (f14), 4 selection of temperature unit (f15), 3 totalizer reset (f14) -7 – Yokogawa RAMC User Manual
Page 33: 4 selection of temperature unit (f15) -7
<6. ELECTRONIC TRANSMITTER (-E)>
6-7
IM 01R01B02-00E-E 10th edition January 01, 2013 -00
All Rights Reserved. Copyright © 2003, Rota Yokogawa
6.2.4 Selection of temperature unit (F15)
The function F15 sets the unit of temperature indication.
The following indications can be set : degC (Celsius) or degF (Fahrenheit).
At the factory the display is set to degC indication.
The selection of the indication is as follows :
Description
Selection
Key
Indication
Change to setting mode
Enter
Display mode
F1-
Setting mode
Enter
4 x →
Enter
F11
F15
F15 -1
Selection
degC
degF
Enter
→
Enter
F15
F15 -2
F15
Back to display mode
↑
↑
F1-
Display mode
Note: If you press “↑" instead of “Enter”, you can return from the selected point to the previous menu
without activating the displayed parameter.
6.2.3 Totalizer reset (F14)
Function F14 resets the totalizer to zero.
The counter reset is performed as follows:
Description
Selection
Key
Indication
Change to setting mode
Enter
Display mode
F1-
Setting mode
Enter
3 x →
Enter
F11
F14
F14 -1
Selection
Reset
Enter
F14
Back to display mode
↑
↑
F1-
Display mode
Note: If you press “↑" instead of “Enter”, you can return from the selected point to the previous menu
without activating the displayed parameter.