Yokogawa Wireless Temperature Transmitter YTA510 - Manual (Page 35)

<7. Setting Parameters>
7-3
IM 01C50E01-01EN
7.3.2 Function Block and Menu Tree
(1) Function Block
The function of this transmitter is shown below. A specific function might not be able to be used according to
the field wireless configuration tool used. When the field wireless configuration tool of our recommendation is
used, the software attached to the Field Wireless Integrated Gateway is necessary for setting the dotted line
part.
Refer to Subsection 8.2 “Calibration Instruments Selection” for the field wireless configuration tool of our
recommendation.
(a) Integral antenna type: single sensor input (Amplifier housing code 7)
• Configuration
• Diagnostics/Alerts
• Power Status
• Identification
(UAPMO)
(UDO)
• Configurationn
• Others
(CO)
• UAPMO
• UDO
• CO
• TRANSDUCER
• AI1 Temp
Online Menu
• UAP Option
• Hardware Write Protect
• Static Revision
• Reset Energy Left
• Radio Silence
(Configuration)
• Diagnostic Status
• Diagnostic Status Detail1,
Diagnostic Status Detail2
• Diagnostic Switch
• Diagnostic Configuration
(Diagnostics/Alerts)
• Version Revision
• CTS Version
• ITS Version
• Identification Number
(Identification)
(APP Download)
(Configuration)
(Others)
(COMM_ENDPOINT)
(COMM_CONTRACT)
(PUB_ITEM)
F0702-1.ai
• Energy Left
• Power Supply Status
(Power Status)
• APP Download
• DESCRIPTION
• STATE
• MAX_BLOCK_SIZE
• LAST_BLOCK_DOWNLOADED
• ERRER_CODE
• COMM_ENDPOINT
• COMM_CONTRACT
• PUB_ITEM_MAX
• PUB_ITEM_NUM
• PUB_ITEM
• REVISION
• Network address of remote endpoint
• Transport layer port at remote endpoint
• Object ID at remote endpoint
• Stale data limit
• Data publication period
• Ideal publication phase
• PublishAutoRetransmit
• Configuration status
• ContractID
• Contract_Status
• Actual_Phase
• ObjectID
• AttributeID
• AttributeIndex
• Size