5 replacing the batteries, 6 handling batteries, Replacing the batteries -5 – Yokogawa Wireless Temperature Transmitter YTA510 User Manual

Page 56: Handling batteries -5, Warning, Caution

Advertising
background image

<8. Maintenance>

8-5

IM 01C50E01-01EN

8.4.5 Replacing the Batteries

The batteries in the battery pack can be replaced.

Batteries are not installed when shipped from the

factory. Assemble the battery pack as follows.

WARNING

Be sure to replace the batteries or disassemble

and assemble the battery pack in a non-

hazardous area. Doing so in an hazardous area

could cause an explosion.

CAUTION

When replacing the batteries, be sure to replace

the two batteries at the same time and do not

use an old and a new battery together..

■ Disassembling
1) Loosen the two battery case mounting screws.

2) Separate the battery case into two parts.

3) Remove the old batteries.
■ Assembling
1) Insert new batteries into the battery case.

2) Attach the two parts of the battery case to each

other.

3) Tighten the two battery case mounting screws

to a torque of approximately 0.7 N•m.

The screw has the dropout

prevention mechanism,it is not

separated from the battery pack

F0804.ai

Figure 8.4

Disassembling the Battery Pack

8.4.6 Handling Batteries

This battery pack uses two primary lithium/

thionyl chloride batteries. Each battery contains

approximately 5 grams of lithium, for a total of 10

grams in each pack. Under normal conditions,

the battery materials are self-contained and are

not reactive as long as the batteries and the pack

integrity are maintained. Care should be taken to

prevent thermal, electrical or mechanical damage.

Protect the electrode of the battery pack to avoid

rapid electrical discharge. Discharged a battery may

lead to fluid leakage and excessive heat. Batteries

should be stored in a clean and dry area. For

maximum battery life, storage temperature should

not exceed 30°C.

WARNING

Handling the battery pack

The following precautions must be observed

in order to safely and effectively use a battery

pack. Improper use may lead to fluid leakage,

excessive heat, ignition, or explosion.

• Never charge it.

• Do not short-circuit it.

• Do not disassemble, transform, or modify it.

• Do not heat it or throw it into a fire.

• Do not soak it in fresh water or seawater.

CAUTION

Observe the following precautions for the safe

disposal of batteries.

• Do not incinerate the battery, and do not

expose it to a high temperature of 100°C

or more. This may lead to fluid leakage or

explosion.

• Dispose of the battery according to laws and

regulations.

Use the following dedicated parts for the battery

pack and batteries.

■ Battery pack

Part number: F9915NQ (with batteries)

Part number: F9915NK (without batteries)

■ Batteries

Part number: F9915NR

Alternatively, Tadiran TL-5930/S batteries may

be purchased and used.

Advertising