Yokogawa EXA PH202 2-Wire pH/ORP Analyzer - Manual (Page 136)

IM 12B07D02-01E
PREFACE
Electric discharge
The EXA analyzer contains devices that can be
damaged by electrostatic discharge. When servic-
ing this equipment, please observe proper pro-
cedures to prevent such damage. Replacement
components should be shipped in conductive pack-
aging. Repair work should be done at grounded
workstations using
grounded soldering irons and wrist straps to avoid
electrostatic discharge.
Installation and wiring
The EXA analyzer should only be used with equip-
ment that meets the relevant international and
regional standards. Yokogawa accepts no respon-
sibility for the misuse of this unit.
The instrument is packed carefully with shock
absorbing materials, nevertheless, the instrument
may be damaged or broken if subjected to strong
shock, such as if the instrument is dropped. Handle
with care.
Although the instrument has a weatherproof
construction, the transmitter can be harmed if it
becomes submerged in water or becomes exces-
sively wet.
Do not use an abrasive material or solvent when
cleaning the instrument.
Do not modify the PH202 transmitter.
Electrostatic charge may cause an explosion haz-
ard. Avoid any actions that cause the generation of
electrostatic charge, e.g., rubbing with a dry cloth.
Warning label
Because the enclosure of the pH/ORP transmitter
Type PH202S-E, -P, -F are made of aluminium, if it
is mounted in an area where the use of category
1 G Zone 0 apparatus is required, it must be
installed such, that, even in the event of rare inci-
dents, ignition sources due to impact and friction
sparks are excluded.
DANGER DANGER
CAUTION CAUTION
WARNING WARNING
Notice
• This manual should be passed on to the end
user.
• The contents of this manual are subject to
change without prior notice.
• The contents of this manual shall not be
reproduced or copied, in part or in whole,
without permission.
• This manual explains the functions contained in
this product, but does not warrant that they are
suitable the particular purpose of the user.
• Every effort has been made to ensure accuracy
in the preparation of this manual.
However, when you realize mistaken
expressions or omissions, please contact the
nearest Yokogawa Electric representative or
sales office.
• This manual does not cover the special
specifications. This manual may be left
unchanged on any change of specification,
construction or parts when the change does
not affect the functions or performance of the
product.
• If the product is not used in a manner specified
in this manual, the safety of this product may be
impaired.
Yokogawa is not responsible for damage to the
instrument, poor performance of the instrument
or losses resulting from such, if the problems
are caused by:
• Improper operation by the user.
• Use of the instrument in improper applications
• Use of the instrument in an improper
environment or improper utility program
• Repair or modification of the related instrument
by an engineer not authorized by Yokogawa.
Safety and Modification Precautions
• Follow the safety precautions in this manual
when using the product to ensure protection and
safety of the human body, the product and the
system containing the product.
How to dispose the batteries:
This is an explanation about the new EU Battery
Directive (DIRECTIVE 2006/66/EC). This directive
is only valid in the EU. Batteries are included in
this product. Batteries incorporated into this prod-
uct cannot be removed by yourself. Dispose them
together with this product. When you dispose this
product in the EU, contact your local Yokogawa
Europe B.V.office. Do not dispose them as
domestic household waste.
Battery type: silver oxide battery
Notice:
The symbol (see above) means they shall be
sorted out and collected as ordained in ANNEX
II in DIRECTIVE 2006/66/EC.