Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 139)

Other Conventional Surveying Tutorials
129
Radial Sideshots
The Radial Sideshots screen is used to perform repetition shots to a
backsight and any number of foresights (side shots) from the same
occupy point. The behavior of the routine is a cross between the
Repetition Shots routine (Page 125) and the Multiple Sideshots
routine.
A single set in the Radial Sideshot routine starts with a direct shot to
your backsight followed by a shot to each foresight. You then flip the
scope and shoot reverse shots to each foresight and a reverse shot to
the backsight. You can perform any number of sets and you have the
option to shoot the reverse shots to each foresight in the same order
that the direct shots were taken or in reverse order, but the backsight
is always shot last for each set.
The following example illustrates how to use the Radial Sideshot
routine.
1. From the Main Menu, select . Survey , Radial Sideshots . If you
have not already setup your backsight, you will need to do so first.
You must use a backsight point since the routine does not support
a backsight direction.
2. Before taking any side shots, you should tap the button to
check the settings. The Radial SS Settings screen is only
accessible from this location. It is identical to the Repetition
Settings screen (Page 126) with the exception of the choices for
the Shooting Sequence.