Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 94)

User’s Manual – Conventional Mode
84
9. Tap from the New Template screen
and the Save As screen will open.
Enter T1 in the Name field and tap .
This completes the creation of a
template.
Building an Alignment
The Edit Alignments routine is used to create an alignment and is
explained in detail starting on Page 45. If you do not currently have
any alignments stored on the data collector, either create a simple
alignment now that is at least 300 feet long, or follow the instructions
that start on Page 45 to create a new alignment that contains each
possible type of horizontal and vertical section.
Putting the Road Together
The final step in creating a road that can be point staked or slope
staked is to use the Edit Roads routine to combine the template(s)
with the alignment and define any widenings and super elevations.
In this example, we will use only one template for the entire road.
We will use a widening to add a second lane to the right side of the
road and we will add four super elevation definitions to bank the left
and right side of a curve.