Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 303)

GPS Module
293
Warning: It is not recommended that Bluetooth communication be
used while logging GPS data to use for post processing. This scenario
requires constant and reliable communications between the data
collector and the receiver, which can only occur when using a
communication cable.
Bluetooth Setup in Windows
This section describes how to enable Bluetooth in Windows and create
a partnership with the device the data collector will communicate
with.
Bluetooth can only be used on a Ranger when the following two
requirements are met:
• The peripheral hardware has Bluetooth built in and is
explicitly supported by Survey Pro.
• Your Ranger includes the Bluetooth hardware.
Bluetooth hardware is included on the Ranger 500X, optional on the
Ranger 300X and not supported on the original Ranger. The
following two steps explain how to determine if Bluetooth hardware is
installed on a Ranger 300X.
1. Exit Survey Pro if it is running to return to the Windows
operating system.