Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 69)

Conventional Fieldwork
59
b. Tap Insert… and enter a new point using the General and
Location
cards with the following values, as shown: Point
Name
: 2
Northing
: 5050
Easting
: 5050
Elevation
: 100
Description
: Backsight
and then tap .
4. Set up your backsight. In this example, we
will set up on Point 1 and backsight Point
2, which was just created.
a. Access the Survey , Backsight Setup
screen.
b. In the Occupy Point field, enter 1 as the
point name.
Tip: You can also select an existing point from a map view or
from a list by using the
power button.