Spectra Precision Survey Pro v4.6 Ranger User Manual User Manual
Page 187
Other Conventional Surveying Tutorials
177
Note: if closing to a known location and a closing location is
not specified, it is automatically assumed that the first point
of the traverse will be the closing location.
8. Tap Next > to open the final screen of the adjustment
wizard, which displays the changes that will be made by
the adjustment where they can be previewed before the
actual adjustment is applied.
The screen lists the adjustment details in three main
sections: the angle adjustment details; the compass rule
adjustment details, and the point details where the
before-and-after coordinates for each point are listed. An
example of the information provided in this screen is
shown here.
9. If you are satisfied with the changes that will be made by
the adjustment routine, tap Adjust to perform the
adjustment.