Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 92)

User’s Manual – Conventional Mode
82
1. Tap Roads , Edit Templates to open the Add/Edit Templates
screen.
2. Tap New… to open the New Template screen. The Cut Slope
and Fill Slope values are the slopes to compute the location of
catch points with the Road Slope Staking routine. These
values can also be easily changed from that routine.
3. Tap Insert… . This will open the Edit
Segment dialog box. Enter the
following information to define the first
segment, which will be a 20-foot wide
roadbed with a -2% slope.
Segment Name: Roadbed
Horizontal Distance: 20
Slope: -2
4. Tap to return to the New Template
screen where the new roadbed segment
will appear. A list of segments is
displayed. At this point, only the
roadbed and <End> will be displayed in
the list. Whenever a new template is
inserted, it is inserted above the
template that is selected in this list.
Therefore, to add a new segment to the
end of the last segment, <End> should
be selected prior to tapping Insert….