Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 66)

User’s Manual – Conventional Mode
56
Data Collection Example
This section illustrates the necessary setup and usage of the Traverse
/ Side Shot screen, which is the primary screen used during data
collection. We will create a new job and manually add another point
to the job to use as a backsight. We will run in manual mode so the
shot data must be entered manually. This example and the following
stakeout example are the only examples that are designed where the
user should follow along and enter the values in their data collector
as they are provided in the example.
Setup
1. Create a new job.
a. From the Main Menu, select File ,
Open / New .
b. Tap New… to open the Create a New
Job screen
c. Enter any job name that you wish in
the Job Name field and tap Next > .