Spectra Precision Survey Pro v4.6 Ranger User Manual - Manual (Page 317)

Basic GPS Module
307
3. Tap Change Radio Settings if you need
to configure the radio. The current
settings are displayed in the upper
portion of the screen. Make any
necessary changes in the lower portion
of the screen and tap Set to send the
changes to the radio.
Note: some settings on the radio cannot be
modified with Survey Pro. To fully program
the radio modems, you need to PC software
that should be supplied with the radio.
Using a Cellular Phone
1. Open the Job > Settings > Connection
screen and select the Internet (Single
Base/NTRIP) RTK
radio button.
Enter the Network IP and Network Port
for the connection.
If a Dial-Up Connection already exists,
select it in the corresponding field and
tap to finish and skip the remaining
steps. If one needs to be created tap
Manage Connections to continue.
2. Under My ISP, tap Add a new modem
connection
.