In-Situ Aqua TROLL 100 and 200 Operators Manual - Manual (Page 26)

Page 26 Aqua TROLL Operator’s Manual
This section provides a quick overview of the initial steps
necessary to get the instrument ready to communicate:
4 Select the appropriate TROLL Com for communication. This
determines the hardware connections, and may influence
the software installation. The drawing on the following page
shows the function of the different TROLL Com models.
4 Install the software.
4 Connect the hardware, based on the selected TROLL Com.
4 Open the software and establish communication with the
Aqua TROLL Insturment. See Section 4 of this manual for an
overview of Win-Situ operations.
3 Getting Started