Prepare to log data – In-Situ Aqua TROLL 100 and 200 Operators Manual User Manual
Page 43
Advertising
Page 43
Aqua
TROLL Operator’s Manual
Section 4: Using Win-Situ
Prepare to Log Data
1. To program the device to log data, go to the Logging tab.
2. Click the “New” button.
The Logging Setup Wizard will guide you through the
configuration of a data log—including the site, log name,
parameters to measure, sample schedule, start time, stop time,
level output, and other options.
TIP: Stop “polling”
in the Home screen
before setting up a
data log.
TIP: For more
complete information
on setting up
data logs, see the
Win-Situ Help menu.
Logging tab
“New” button
Advertising
This manual is related to the following products: