Connect the hardware, Usb troll com – In-Situ Aqua TROLL 100 and 200 Operators Manual User Manual
Page 29
![background image](/manuals/367689/29/background.png)
Page 29
Aqua
TROLL Operator’s Manual
Connect the Hardware
1. Connect the Aqua TROLL Instrument to the selected TROLL
Com as illustrated earlier in this section.
• Direct Connect: Attach via push-on connection to the
Aqua TROLL back end.
• Cable Connect: Connect the twist-lock connectors on the
Aqua TROLL Instrument and the RuggedCable.
2. Insert the TROLL Com into the computer port.
USB TROLL Com
When you plug in a USB TROLL Com, the USB drivers that were
downloaded when you installed Win-Situ 5 will be installed.
• After installation, check as follows to find which COM port the
connected USB TROLL Com is using:
• Windows 2000, Windows XP: Control Panel > System >
Hardware tab > Device Manager > Ports. Click the plus sign to
display the ports.
• Windows Vista and 7: Control Panel > System > Device
Manager (Administrator permission required) > Ports. Click
the plus sign to display the ports.
After connections are made, you are ready to launch the
software and program the Aqua TROLL Instrument. Section 4
of this manual is an overview of Win-Situ. For more detailed
information, see the Win-Situ Help menu.
Section 3: Getting Started